|
|
|
| |
PANHANS Euro 5.1-saw with new ideas ... |
 |
 |
Data input via keypad or touchscreen |
|
|
 |
Rotating segment protection main saw blade 300 mm = cutting height max. 72 mm |
|
|
 |
The saw blade starts to cut directly at the angle fence, therefore shortening the operational cycle |
|
|
 |
The fully automated angle cut device with length compensation |
|
stronger |
- Main saw motor 11 kW
- Scoring saw motor 1,5 kW
- Pusher fence motor 0,75 kW
- Stronger guiding bars for the saw carriage
- Massive I-beams for the pusher fence
|
faster |
- Shorter cutting cycle
- 80 m/min saw carriage - feedspeed / rack and pinion drive
- pusher fence with return speed 80 m/min
|
more precise |
- wide guidance of saw carriage
- vertical guidance for main and scoring saw with profile tracks
- glued table top - no screws
|
more efficient |
- cutting height max. 72 mm
- exceptional price-quality ratio
- precise finished cuts
- angle cut without adjustment time
|
|
|
Technical Data: |
Working area x-axis max. |
3200 mm / 4200 mm |
Working area y-axis max. |
3200 mm / 4200 mm |
Main saw blade diameter when using the scoring saw |
max. 300 mm |
Cutting height max. |
72 mm |
Emerge of blade max. |
82 mm |
Main saw motor 15 HP |
11 kW |
| Main saw rpm |
5660 1/min |
| Scoring saw motor (2,0 HP) |
1,5 kW |
| Scoring saw rpm |
5780 1/min |
| Feed motor saw carriage |
0,75 kW |
| Speed saw carriage, variable |
0 - 80 m/min |
| Return speed of saw carriage |
80 m/min |
| Feed motor pusher fence |
1,1 kW |
| Speed pusher fence, variable |
0 - 25 m/min |
| Return speed of pusher fence |
80 m/min |
| Air pressure |
8 bar |
| Voltage |
400 V / 50 Hz |
| Emission value related to the working position |
DIN 45 635 Part 1650 |
| Noise level in idle run |
76,7 dB (A) |
| Noise level in operation |
80,5 dB (A) |
Dust emission |
0,45 - 1,02 mg/m3 |
| Min. suction speed at base |
35 m/s |
| Suction point at saw unit |
140 mm ø, 1 piece |
| Suction points at pressure beam: |
|
| At sawing length 3200 mm |
100 mm ø, 2 piece |
| At sawing length 4200 mm |
100 mm ø, 3 piece |
|
|
|
|
| New Machinery |
|
|
|
|
|
| Used Machinery |
|
|
|
|
|
|
|
| Software |
|
|
|
|
|
|
|
|
|
| |
|
|
|
 | |
|
|
